Analyze & Simulate anything !
80 mm Mortar Grenade An 80 mm mortar grenade typically refers to an explosive projectile designed to be fired from an 80 mm mortar system. Mortars are indirect fire weapons that launch projectiles at a steep angle, allowing them to arc over obstacles and land on targets that are not in the direct line of…
Read More “8cm Mortar Grenade vs KV-1 Top Armor | Overpressure | Explosion Blast” »
Proceedings of the 2019 Hypervelocity Impact SymposiumHVIS2019April 14 – 19, 2019, Destin, FL, USA Markus Graswald *, Raphael Gutser, Jakob Breiner, Florian Grabner, Timo Lehmann,and Andrea Oelerich **TDW GmbH, Hagenauer Forst 27, 86529 Schrobenhausen, Germany** WTD 91, Schießplatz 1, 49716 Meppen, Germany Abstract An open source research and vulnerability study of main battle tanks and…
Artefact : 125mm HE vs SPACED ARMOUR | 3OF19 High Explosive Armour Penetration Simulation Simulation of the 125mm 3OF19 HE-FS projectile against single plate armour and spaced armour. Spaced armour is supposed to improve protection against explosives, as the air gap allows for the blast energy to be dissipated before hitting the armour underneath. The…
Read More “Predictive results for Explosive Armor Penetration Simulation” »
Simulation of the 125mm 3OF19 HE-FS projectile against single plate armour and spaced armour. Spaced armour is supposed to improve protection against explosives, as the air gap allows for the blast energy to be dissipated before hitting the armour underneath. The total metal weight and thickness is equal for both tests, but with the spaced…
Computational Fluid Dynamics Analysis of Butterfly Valve Butterfly valves are widely used in various industries for controlling the flow of fluids. They are known for their simple design, compact size, and low cost. However, the performance of a butterfly valve can be greatly influenced by the fluid dynamics involved. Computational Fluid Dynamics (CFD) analysis is…
Read More “Computational Fluid Dynamics Analysis of Butterfly Valve – ChatGPT Generated” »
Simulation of a T-72A projectile hitting turret frontal armor of Leopard 2AV (1976). 125mm 3BM15 APFSDS (3.9kg projectile, 44-30mm diameter, steel penetrator/cap + 0.26kg tungsten carbide core) at 1560 m/s vs Leopard 2AV turret cheek (perpendicular to the armor, 710mm LOS) Simulating the interaction between a 125mm 3BM15 APFSDS projectile and the frontal turret armor…
Read More “T-72A vs Leopard 2AV | 3BM15 | Armor Penetration Simulation” »
Table of Contents The Importance of Armor Penetration in Ultra Porcelain Armor The Importance of Armor Penetration in Ultra Porcelain Armor Ultra Porcelain Armor is a revolutionary development in the field of armor technology. With its exceptional strength and durability, it has become the go-to choice for military personnel and law enforcement agencies around the…
Simulating the interaction between a 125mm 3BM32 APFSDS projectile and the turret armor of an unconfirmed variant of the T-64B during its development period can provide some insights, but please note that accurate armor penetration calculations can be complex and dependent on various factors. These factors include the angle of impact, projectile performance, armor composition…
Reproducing a complex simulation like the one you described requires access to the specific source code used for the simulation, as well as the necessary hardware and software environment. Unfortunately, I don’t have direct access to external repositories, and I can’t help you directly execute code or run simulations. However, I can provide you with…
Flow simulation of a Football is performed using ANSYS CFX in this project. Around 6.8 million mesh elements are used in this analysis. Inlet velocity is 8 m/s. For modeling turbulence SST turbulence model is used. Original 3D model of the football is from Xan San.
Daniel LaCroixdlacroix@pointwise.com Radek Mácaradek.maca@cfdsupport.com This report presents the benchmark validation of CFD simulation results of the Potsdam PropellerTest Case (PPTC), using TCFD® with POINTWISE® mesh. PPTC is a marine propulsor that wasextensively measured by SVA Potsdam and related data were published [1] [2] [3]. The aim of thisbenchmark was to evaluate the TCFD®, computational fluid…
Centrifugal fans are commonly used for various industrial and commercial applications to move air or other gases. Parametric optimization based on Computational Fluid Dynamics (CFD) involves using numerical simulations to analyze and improve the design of a centrifugal fan. Here’s a step-by-step guide on how you can perform parametric optimization for a centrifugal fan using…
It seems like you’re looking for information about optimizing the parameters of a centrifugal pump impeller using a combination of software tools like CFturbo and TCAE TOPT. Let’s break down the components you’ve mentioned: Remember that the effectiveness of any optimization process depends on the accuracy of input parameters, the algorithms used, and the quality…
Read More “Centrifugal Pump CFturbo+TCAE TOPT Parametric Optimization Impeller” »
It sounds like you’re describing a simulation and visualization involving a Francis Turbine’s particle-like flow, simulated using TCAE (presumably some computational fluid dynamics software) and then visualized using ParaView, a popular scientific visualization tool. While you haven’t provided specific details, I can give you a general overview of the steps involved in such a process:…
The BTR-4 is an 8×8 wheeled armored personnel carrier (APC) developed in Ukraine, while the T-72 is a Soviet-designed main battle tank. The BTR-4 is designed for transporting infantry and providing fire support, while the T-72 is a heavily armored tank with a primary focus on engaging enemy armored vehicles. The 30mm 3UBR8 APDS is…
Read More “BTR-4 vs T-72 Multiple Impact Simulation | 30mm 3UBR8 APDS Armor Piercing Simulation” »
Comparing the RP-3 rocket and the Soviet Tiger 152mm rocket in a simulation scenario involves examining various factors like design, capabilities, and intended use. The RP-3 rocket was a British WWII-era air-to-ground rocket used primarily against ground targets, featuring a variety of warheads for different purposes, including high-explosive, armor-piercing, and shaped-charge versions. On the other…
Read More “RP-3 ROCKET vs TIGER | 152mm High Explosive Rocket Armour Piercing Simulation” »
Simulating a head kick in football/soccer using ANSYS Workbench Explicit Dynamics involves setting up a complex analysis that considers the interaction between various components, such as the ball, player’s head, and potentially the player’s body. The primary goal is to analyze the impact forces, deformation, and dynamic behavior during the head kick event. Here’s a…
Read More “Football : Simulation of head kick in football/ soccer” »
It seems like you’re describing a simulation scenario involving ANSYS Workbench Explicit Dynamics, where a dummy without a seatbelt impacts an airbag. ANSYS Explicit Dynamics is a finite element analysis software that is commonly used to simulate transient, dynamic events like impacts, explosions, and crashes. To set up a simulation like the one you’ve described,…
Static structural simulation is a method used to analyze the behavior of a structure under various loads and conditions without considering dynamic effects like acceleration, vibration, or inertia. In the context of a teleferic (also known as a telpher or cable car), a static structural simulation would involve evaluating how the various components of the…
Read More “Static Structural Simulation of a teleferic or telpher cable car” »
It seems like you’re asking about simulating a scenario in ANSYS Workbench (WB) Explicit Dynamics where a truck with loose cargo experiences deceleration due to braking at 100g (where “g” is the acceleration due to gravity). ANSYS Workbench Explicit Dynamics is a powerful tool for simulating transient dynamic events, including impact, collision, and various mechanical…
Read More “Truck with loose cargo brakes with 100g deceleration” »
From the perspective of Finite Element Analysis (FEA), an impact scenario involving a car bumper impacting the hip from two directions at a speed of 36 km/h would be evaluated using simulation techniques. FEA is a computational method used to analyze the behavior of structures and materials under various loading conditions, such as impacts. Here’s…
Read More “Car bumper impacting hip on 2 directions at 36 km/h” »
LS-DYNA is a widely used finite element analysis (FEA) software for simulating complex real-world events and behaviors. It’s often used in the automotive industry to simulate various scenarios, including car braking and crash simulations. The term “dummy” usually refers to anthropomorphic test devices (ATDs) or crash test dummies, which are used to simulate the response…
Read More “Car braking with dummy under 3 point seatbelt at 150g deceleration” »
ANSYS Workbench Explicit Dynamics is a simulation software tool used to perform dynamic, highly nonlinear, and transient simulations of various engineering scenarios. This tool is commonly used to analyze situations involving impacts, explosions, crashes, and other dynamic events. If you’re looking to simulate a heavy truck impacting a concrete street barrier or parapet using ANSYS…
In order to compare the effectiveness of the 7.5cm Pzgr 39 projectile from the Panther tank against the frontal armor of the M4A3 Sherman tank, we need to consider the penetration capabilities of the projectile and the resistance of the armor. The 7.5cm Pzgr 39 is an armor-piercing capped ballistic cap (APCBC) projectile designed to…
Read More “Panther vs M4A3 | Concrete armor effectiveness comparison | Simulation” »
To simulate the interaction between the 105mm M111 APFSDS projectile fired from a Merkava I tank and the frontal armor of a T-72A tank, we can use the concept of armor penetration calculations. The penetration of a kinetic energy penetrator like an APFSDS round depends on several factors, including the projectile’s velocity, mass, and shape,…
Read More “Merkava I vs T-72A | Armor penetration Simulation” »
Simulating the interaction between a projectile and an armor plate involves various factors, including projectile velocity, projectile type, armor thickness, armor hardness, impact angle, and more. While I can provide a general overview of how this simulation might be approached, keep in mind that detailed simulations usually require specialized software and expertise in ballistics and…
Read More “Concrete Armor | M4A3 | Armor penetration Simulation” »
Garrett Motion Wins 2021 Automotive News PACE Award for Industry-First Electric Turbo Garrett’s state-of-the-art E-Turbo has been recognized as a superior innovation with an Automotive News PACE (Premier Automotive Suppliers’ Contribution to Excellence) Award, a first for electric turbochargers. World-class Garrett engineers successfully overcame the many challenges in thermal management, energy recovery, compact packaging and high-volume…
In this simulation, you’re comparing the penetration capability of a Panzer IV Ausf F2 tank firing a 7.5cm Pzgr 39 APCBC projectile at a Valentine Mk V tank with 50mm angled armor at 56 degrees. The key factors here are the projectile’s characteristics and the armor’s properties. The Panzer IV Ausf F2 was equipped with…
Read More “Panzer IV F2 vs Valentine V | Armor Penetration Simulation | 7.5cm Pzgr 39” »
Simulating the interaction between a 125mm 3BM9 APFSDS projectile fired from a T-72 tank and the frontal armor of an M1 Abrams tank as described requires some complex calculations and modeling. While I can’t perform real-time simulations, I can provide you with some insights into how such an interaction might be analyzed using general principles…
Read More “T-72 vs M1 Abrams | Armor Penetration Simulation | NERA” »
Simulating the impact of a 125mm 3BM9 APFSDS projectile hitting the frontal armor of an M1 Abrams tank requires considering various factors, including the projectile’s velocity, diameter, material properties, and the layered composition of the Abrams’ armor. However, I should note that the following analysis is a simplified estimation and doesn’t account for all the…
Read More “152mm HE vs Tiger II | Armor Penetration Simulation | High Explosive” »
Combat Analysis and Simulation
Mechalab offers simulation services that can include armor penetration simulations. By submitting your drawings and simulations, our high-performance computing resources can be utilized to run simulations for armor penetration analysis. This can help scientists and engineers in the field of defense, security, or related industries to evaluate the effectiveness of different materials, designs, or projectiles…
Applique armor (ERA thickness equivalent) Penetration Simulation Analyzing a failed Javelin missile launch from the ground to air using Finite Element Analysis (FEA) requires a multi-step approach involving physics, engineering principles, and simulation techniques. While I can provide a general outline of the process, please note that specific details will depend on the actual data…
T-34 vs Panzer IV | Armor Penetration Firefly Sherman vs Panther | Armor Penetration
by Ed Cort Armor and anti-armor technology is becoming increasingly complex, forcing weapons designers to rely more and more on computermodeling. For years, computer simulations of armor penetration contributed only modestly to armor development compared, say, to the role of computational fluid dynamics in the aircraft and aerospace industries. However, computer modeling is becoming a…
Ballistic testing is a vital part of the armor design. However, it is impossible to test every condition and it is necessary to limit the number of tests to cut huge costs. With the introduction of hydrocodes and high performance computers; there is an increasing interest on simulation studies to cutoff these aforementioned costs. This…
By Extreme Engineering Simulation Reactive armour[1] is a type of vehicle armour that reacts in some way to the impact of a weapon to reduce the damage done to the vehicle being protected. It is most effective in protecting against shaped charges and specially hardened kinetic energy penetrators. The most common type is explosive reactive armour (ERA), but variants include self-limiting explosive reactive armour (SLERA), non-energetic…
A tank is made up of thousands of moving parts, but the most important is YOU.
Nuclear Blast Simulation
Blast injuries are caused by the impact from a complex pressure wave generated by an explosion. The explosion causes an instant rise in pressure, which creates a blast wave. Quick Analysis of extended damages Blast injuries can be categorized into primary, secondary, tertiary, and quaternary injuries:
It sounds like you’re describing a simulation involving hot strip rolling using the IMPETUS Afea Solver. This simulation involves a fully coupled thermo-mechanical process where you achieve a substantial 90% reduction in thickness without the need for remeshing. Here are some key points from your description: Overall, the information you’ve provided showcases the impressive capabilities…
The USS Cole incident refers to a terrorist attack on the U.S. Navy guided-missile destroyer USS Cole (DDG-67) that occurred on October 12, 2000, while the ship was refueling in the Yemeni port of Aden. The attack was carried out by suicide bombers from the terrorist organization al-Qaeda using a small boat laden with explosives….
Le spécialiste de la simulation, Ansys, a démontré, grâce à une simulation numérique, l’efficacité de la désinfection robotisée par lumière UV, une technologie envisagée par Airbus et Boeing pour éradiquer le Covid-19 de la cabine de leurs avions. Avec la reprise progressive des activités économiques, la désinfection des lieux clos devient un enjeu majeur pour…
Read More “Covid-19 : Ansys simule la désinfection aux UV d’une cabine d’avion par un robot” »
Search any videos about multiphysics simulation and analysis, Computational fluid Dynamics, Reinforcements analysis, Beam analysis, Motor vehicle parts analysis, aerospace and defence parts analysis and simulation…. Texas A&M – Investigation of a human sneeze A special mention goes out to the researchers at Texas A&M University. They have published results from their investigation into a…
Read More “CFD Tube – Discover Computational fluids dynamics and Simulation –” »
